Constant inflow of powders, particles, and granulates in vacuum conveying
Dinnissen Process Technology
has developed a new pneumatic Pick-Up device for providing a constant
inflow of powders, particles, and granulates in vacuum conveying
systems. The Pick-Up works completely automatically on the basis of the
transport pressure that has been set. Mechanical dosage devices such as
sluice valves or screws are superfluous. Dinnissen’s new Pick-Up plays a
crucial role in its innovative Slow Flow Conveying systems which can be
used to pneumatically transport even the most fragile, sticky, and soft
products quickly, easily and effectively.
Slow
Flow Conveying is the pneumatic conveying system developed by Dinnissen
especially for the transport of fragile, sticky, and soft products.
Slow Flow Conveying works according to the principle of underpressure or
overpressure transport. Powders, particles, or granulates are
transported from one or more inflow points to a single compact receiving
unit with the help of a controlled flow of air or gas. In Slow Flow
Conveying, it’s crucial to minimise the friction between the product
particles in order to ensure that fragile, sticky, or soft products are
transported as efficiently and gently as possible. To realise this, the
transport speed is minimised, and the ratio between the amount of
product being transported and the amount of transport air or gas used is
relatively high. In order to carefully and gently transport fragile
ingredients, it’s also crucial to ensure a constant supply of product to
the conveying system. After all, a constant supply rate results in a
proper loading factor, a smooth production process, and an optimum end
product quality.
Minimising product damage and mechanical maintenance
Dinnissen
has developed a new Pick-Up for vacuum conveying systems to ensure
that, regardless of the product in question, the product can be
transported through the system at exactly the proper loading factor and
speed. Dinnissen’s new Pick-Up plays an important role in its innovative
Slow Flow Conveying system. The Pick-Up is fitted with an automatically
regulated air supply for the inflow of products. This ensures that an
optimum amount of transport air or gas is used for each product. Via the
automatic valve, the precise capacity for one or more inflow products
can be chosen on the basis of transport pressure. This means that the
proper ratio between transport speed and loading factor can always be
realised even for products with very different characteristics. This
makes it possible to transport even the most fragile, sticky, or soft
products easily and quickly and without the use of mechanical dosage
devices, sluices, or screw transporters. The new pneumatic Pick-Up
Device makes it possible to reduce product damage and mechanical
maintenance to an absolute minimum.
More information
Dinnissen
Process Technology is presenting the new Pick-Up and its Slow Flow
Conveying systems at Achema in Frankfurt from 15 to 19 June at its stand
5.0 D17 and at the Victam in Köln from 9 to 11 june at stand B 031.
Slow Flow Conveying is one of the conveying systems in the range of
products supplied by Dinnissen. In the area of bulk transport, Dinnissen
is also specialised in Dense Phase and traditional air transport.
Besides conveying systems, Dinnissen also supplies technologies and
solutions for handling, weighing, mixing, grinding, sieving, and
packaging bulk goods.
Visit the website HERE.
Visit the website HERE.
The Aquaculturists
This blog is maintained by The Aquaculturists staff and is supported by the
magazine International Aquafeed which is published by Perendale Publishers Ltd
For additional daily news from aquaculture around the world: aquaculture-news
No comments:
Post a Comment